Description

PVC Hangar Alaska Extreme 180-71

PVC hangar Alaska Extreme 180-71 dimensions are 20 x 9,15 x 5,5 m, area 183m2. Gate dimensions 3,7 x 4,4 m. PVC material 750 g/m², resistant to UV radiation; colour white; length between frame posts 1m. Possible to install without foundation. Is self-installable or installation can be ordered from us. There are liftable doors on both ends of the hangar. Reinforced frame ensures durability to the weight of snow

Specifications

Dimensions (LxWxH)	20 x 9,15 x 5,5 m.
Gate dimensions	3,7 x 4,4 m.
Tent material	750 g/m2 PVC, resistant to UV radiation
Tent colour	White
Frame material	Oval zinc coated metal pipe 70x40mm
Distance between arches	1 m.
Internal area	183 m2

Use

Alaska Extreme series hangars are made for use in extreme contitions, where snow load and wind speed are higher than normal. Like in northern regions of Sweden and Finland. An advantage for this hangar is the height of the doors, through which any kind of machinery can be moved. The distance between the arches has also been mimized to ensure the greatest strenght of the frame. If you need to make your hangar longer, you can connect similar models together.

Durability

All our hangars are built to withstand the regions climate. Alaska series models have a pointi top, to ensure minimal build-up of snow. As in Estonia and Finland the possibility of heavy snow, winds and storms is greater, we have constructed our frames from a strong oval zinc coated metal pipes . The PVC tent material has been chosen particularly strong, to ensure durability and longevity. According to different sources the life span of PVC, in our region, is 20+ years.

 

Installation

The hangar is easy to install. With two people, it is possible to erect the hangar in a day.  First the support soles are fixed to the ground. The way, they are fixed, depends on the ground.  It is possible to install the hangar on soil. There are 16x500mm metal rods included for that.

There are three for each post. On dense ground it is needed to drill holes beforehand and use a pressure hammer. There are pockets, with a metal pipe inside, on the edges of the tent. The tent is attached to the pipe with straps near each support sole. Using the straps, the tent is tightened equally around the frame. The whole tent is one piece . The gate piece is installed separately and tightened using ropes. The tent is also tightened on the ends using ropes to ensure a tight fit around the frame and to get rid of any wrinkles.

For more details read terms of installation.

 

 

 

Project

If the client wishes, or the local municipality requires, we also offer projects for the hangars.

Read more about it here: https://pvcangaarid.ee/projekt

Warranty

We offer a 3 year warranty for our hangars.