PVC Hangar Alaska Extreme 110-71
PVC hangar Alaska Extreme 110-71 dimensions are 12 x 9,15 x 5,5 m, area 110m2. Gate dimensions 3,7 x 4,4 m. PVC material 750 g/m², resistant to UV radiation; colour white; length between frame posts 1m. Possible to install without foundation. Is self-installable or installation can be ordered from us. There are liftable doors on both ends of the hangar. Reinforced frame ensures durability to the weight of snow
|Dimensions (LxWxH)||12 x 9,15 x 5,5 m.|
|Gate dimensions||3,7 x 4,4 m.|
|Tent material||750 g/m2 PVC, resistant to UV radiation|
|Frame material||Oval zinc coated metal pipe 70x40mm|
|Distance between arches||1 m.|
|Internal area||110 m2|
If interested contact us and place your order here:
Payment by installments for businesses and individuals
Alaska Extreme series hangars are made for use in extreme contitions, where snow load and wind speed are higher than normal. Like in northern regions of Sweden and Finland. An advantage for this hangar is the height of the doors, through which any kind of machinery can be moved. The distance between the arches has also been mimized to ensure the greatest strenght of the frame. If you need to make your hangar longer, you can connect similar models together.
All our hangars are built to withstand the regions climate. Alaska series models have a pointi top, to ensure minimal build-up of snow. As in Estonia and Finland the possibility of heavy snow, winds and storms is greater, we have constructed our frames from a strong oval zinc coated metal pipes . The PVC tent material has been chosen particularly strong, to ensure durability and longevity. According to different sources the life span of PVC, in our region, is 20+ years.
The hangar is easy to install. With two people, it is possible to erect the hangar in a day. First the support soles are fixed to the ground. The way, they are fixed, depends on the ground. It is possible to install the hangar on soil. There are 16x500mm metal rods included for that.
There are three for each post. On dense ground it is needed to drill holes beforehand and use a pressure hammer. There are pockets, with a metal pipe inside, on the edges of the tent. The tent is attached to the pipe with straps near each support sole. Using the straps, the tent is tightened equally around the frame. The whole tent is one piece . The gate piece is installed separately and tightened using ropes. The tent is also tightened on the ends using ropes to ensure a tight fit around the frame and to get rid of any wrinkles.
For more details read terms of installation.
If the client wishes, or the local municipality requires, we also offer projects for the hangars.
Read more about it here: https://pvcangaarid.ee/projekt
We offer a 3 year warranty for our hangars.